Setting Clicker Channel

All MCDB courses will use channel 43 so that the lectern RF receivers do not receive signals from transmitters in adjacent rooms. For your response to be recorded correctly, you must set your transmitter to channel 43 (default setting is 41)
Enter each key and briefly pause before entering the next key. When entering the sequence correctly, you will see the following light signals on your transmitter:
- GO - red/green flash
- 4 - red/green flash
- 3 - yellow
- GO - green (if successful)
- 1/A - yellow flash if at home or outside class,
  - green flash if you are in class with a receiver set to channel 43 in your vicinity.